All Systems Floor Finish
Fast drying formula, developed for use in high profile areas where the ultimate wet look gloss and durability are desired.
|pH||8.2 – 8.8|
|Shelf Life||3 Years|
How To Use
Preparation: Before your initial application, the floor must be stripped of any old finish and rinsed thoroughly with potable water and allowed to dry. Sealing the floor is recommended prior to applying a floor finish.
Application: Using a clean mop and bucket, apply 1-3 coats (depending on the porosity of the floor) allowing the floor to completely dry between coats, at least 15 minutes or more.
Maintenance: Sweep or dry mop frequently. Wet mop or auto-scrub periodically with a properly diluted neutral detergent. Scrub and recoat worn traffic areas as required. Spray buff as needed. Burnishing daily is highly recommended but not imperative.
Coverage: Coverage per 5 L is 186 m² (2000 ft²) to 297 m² (3200 ft²) depending upon porosity of the floor.
Where To Use
Suitable for all resilient and non-resilient floors except for unsealed wood and cork.